1099 Welder Jobs in Johnson City, TN
Pay, market size and contractor rates for independent welders, cutters, solderers, and brazers across the Johnson City, TN area.
- Welders employed
- 220
- Median annual pay
- $47,780
- 1099 equivalent
- $63,731
- Suggested hourly
- $38.30
- Metro population
- 215,000
BLS OEWS, May 2024
all employment types
1.33× — estimate
at 80% utilisation
Census, 2024
Johnson City, TN has 220 welders, cutters, solderers, and brazers and a median wage of $47,780. This page works through what that means for an independent contractor: the pay spread, the rate you need to quote to come out ahead of payroll, and the tax and classification rules that apply in Tennessee.
Every figure is from the Bureau of Labor Statistics' Occupational Employment and Wage Statistics programme (May 2024) or the Census Bureau's 2024 population estimates. Where BLS suppressed a number for this market, the sentence that would have used it is simply absent — nothing here is filled in with an estimate unless it is labelled as one.
How big the Johnson City market is
220 people work as welders, cutters, solderers, and brazers in Johnson City, TN. That figure counts every employment arrangement, W-2 and 1099 alike — BLS does not split the two. Applying 1099WORK's estimate that roughly 25% of welders, cutters, solderers, and brazers work on a 1099 basis puts the independent share near 55 people. Treat that as an order of magnitude, not a census. By headcount the market ranks 249th of the 377 metro areas where BLS publishes a figure for this occupation.
The location quotient is 0.97, within a rounding error of the national average. This is a representative market rather than a specialised one. The metro's population is 215,000, up 3.6% since 2020.
One local factor never shows up in wage data at all: Tennessee levies no state income tax, so a given gross goes further here than the same gross in a taxed state.
Welder pay in Johnson City
Median pay for welders, cutters, solderers, and brazers in Johnson City is $47,780. That works out to $22.97 an hour at a standard 2,080-hour year. That is 6.3% below the national median of $51,000.
The spread matters more than the midpoint for anyone working 1099. The gap between the 10th and 90th percentile is $22,000, which is the range your negotiating position, client mix and specialisation actually move you across. Top-decile earners clear $58,350, against $36,350 at the bottom decile. These are W-2 and 1099 earnings combined, before any contractor adjusts for self-employment tax and unfunded benefits — which is what the next section is for.
| Percentile | Annual | Hourly |
|---|---|---|
| 10th percentile | $36,350 | $17.48 |
| Median | $47,780 | $22.97 |
| Mean | $47,150 | $22.67 |
| 90th percentile | $58,350 | $28.05 |
Johnson City against the wider market
Pay in Johnson City tracks the Tennessee median almost exactly. Against the national median of $51,000 it sits 6.3% below. The location quotient column is the one worth reading twice: it measures how concentrated the occupation is relative to the national average, and it moves independently of pay.
| Area | Employed | Median annual | 90th percentile | Location quotient |
|---|---|---|---|---|
| Johnson City | 220 | $47,780 | $58,350 | 0.97 |
| Tennessee | 12,610 | $47,280 | $63,380 | 1.40 |
| United States | 424,040 | $51,000 | $75,850 | — |
Setting your 1099 rate in Johnson City
A 1099 contract that pays the same headline number as a W-2 job is a pay cut. You pick up the employer's half of payroll tax, you stop being paid for holidays and time off, and health cover and retirement come out of your own revenue. Matching a $47,780 salary in Johnson City therefore takes about $63,731 in contractor gross — a multiplier of 1.33×.
Spread across a full 2,080-hour year that is $30.64 an hour. Nobody bills 2,080 hours: at a more realistic 80% utilisation, with the rest going to admin, invoicing and finding the next contract, the number you should quote is closer to $38.30.
The 1.33× multiplier assumes:
- 7.07% for the employer half of FICA, which self-employment tax shifts onto you
- 20 unpaid days a year — roughly ten holidays plus two weeks off
- 15% for health coverage and retirement you now fund yourself
- excludes business insurance, mileage, accounting fees and unbilled time
What to quote, by experience level
The percentile spread above is more useful as a rate card than as a statistic. Each row below takes a point in the local wage distribution and applies the same 1.33× contractor multiplier, then divides across a realistic 80% billable year. Treat the middle row as your default and the bottom row as a floor you do not go under — not as a starting offer.
| Position in the local market | Annual equivalent | Hourly at 80% utilisation |
|---|---|---|
| Entering the market (10th percentile) | $48,485 | $29.14 |
| Established (median) | $63,731 | $38.30 |
| Specialised (90th percentile) | $77,830 | $46.77 |
Nearby markets for welders, cutters, solderers, and brazers
Contractors are not bound by a metro line the way a commuting employee is, and the neighbouring markets often price the same work differently. Within reach of Johnson City:
| Metro | Employed | Median annual |
|---|---|---|
| Nashville | 2,410 | $50,660 |
| Memphis | 1,620 | $48,170 |
| Knoxville | 1,910 | $47,370 |
| Chattanooga | 1,690 | $48,440 |
| Clarksville | 670 | $51,760 |
What you owe in Johnson City
Nothing is withheld from a 1099 payment. You pay self-employment tax at 15.3% on 92.35% of net profit, plus income tax, in four estimated payments a year. At the Johnson City median that is roughly $1,688 a quarter in self-employment tax alone, before income tax. Tennessee levies no state income tax, so the federal bill is close to the whole picture.
One thing to get right first
Labelling an engagement 1099 does not make it 1099 — the IRS weighs who controls the work, who supplies the tools and who carries the risk. For welders, cutters, solderers, and brazers the usual flashpoints are set schedules, employer-supplied equipment and exclusivity clauses. Tennessee also applies its own test, which can reach a different answer than the IRS does on identical facts.
1099WORK, briefly
1099WORK is a marketplace built for 1099 engagements specifically: companies post a defined scope, welders, cutters, solderers, and brazers keep one verified profile, and agreements, onboarding and payment happen in the same place. It launched as 1099REPS for independent medical sales reps and now covers the wider 1099 economy, Johnson City included.
Frequently asked questions
Do I need an LLC to work 1099 in Johnson City?
No. A sole proprietor can accept 1099 work under their own name and Social Security number, and many contractors start that way. An LLC adds liability separation and lets you elect S-corp taxation once profit is high enough for the payroll-tax saving to beat the extra filing cost. Tennessee sets its own formation fee and annual report requirements.
How many welders, cutters, solderers, and brazers work in Johnson City?
BLS counts 220 welders, cutters, solderers, and brazers in Johnson City. 1099WORK estimates roughly 55 of them work on a 1099 basis, though BLS does not publish that split. That is 249th of 377 US metro areas.
Is 1099 work better than a W-2 job in Johnson City?
It depends entirely on rate and stability. 1099 wins on control, deductibility and upside; W-2 wins on predictability, benefits and unemployment cover. As a rule of thumb, a 1099 engagement needs to pay about 1.33× the equivalent salary before it is genuinely better money.
How much does a 1099 welder make in Johnson City?
The median welder in Johnson City earns $47,780 a year according to BLS OEWS data for May 2024, covering W-2 and 1099 workers together. The top decile clears $58,350. Working 1099, you would need roughly $63,731 in gross billings to match that median after self-employment tax and unfunded benefits.
How often do 1099 contractors pay taxes in Johnson City?
Quarterly. The IRS expects estimated payments in mid-April, mid-June, mid-September and mid-January, and charges an underpayment penalty for missing them even if you pay in full at filing. Tennessee has no state income tax, so the federal schedule is the whole calendar for most contractors there.
What hourly rate should a 1099 welder charge in Johnson City?
About $38.30 an hour at 80% utilisation, derived from the $47,780 local median. That builds in the employer half of payroll tax, twenty unpaid days a year and a 15% allowance for self-funded health cover and retirement. It excludes business insurance, mileage and unbilled sales time.