Hire a 1099 Machinist in Vermont
What it costs to engage an independent machinist in Vermont, and how to keep the engagement compliant.
- Machinists employed
- 380
- Median annual pay
- $49,040
- 1099 equivalent
- $65,412
- Suggested hourly
- $39.31
- State income tax
- Yes
BLS OEWS, May 2024
all employment types
1.33× — estimate
at 80% utilisation
on top of federal
Engaging a 1099 machinist in Vermont means competing for people inside a pool of 380 machinists, against a median wage of $49,040. This page works through what that means for an independent contractor: the pay spread, the rate you need to quote to come out ahead of payroll, and the tax and classification rules that apply in Vermont.
Every figure is from the Bureau of Labor Statistics' Occupational Employment and Wage Statistics programme (May 2024) or the Census Bureau's 2024 population estimates. Where BLS suppressed a number for this market, the sentence that would have used it is simply absent — nothing here is filled in with an estimate unless it is labelled as one.
Vermont by the numbers
Vermont employs 380 machinists. That figure counts every employment arrangement, W-2 and 1099 alike — BLS does not split the two. Applying 1099WORK's estimate that roughly 15% of machinists work on a 1099 basis puts the independent share near 57 people. Treat that as an order of magnitude, not a census.
The location quotient is 0.65 — machinists are 35% less concentrated here than in the average US market. That thins the employer pool, but it also thins the competition for the contracts that do exist.
Where the occupation is under-represented, the constraint is finding buyers rather than beating rivals to them. The discount to national pay matters when you quote: a rate anchored to a national benchmark will meet resistance here.
The real cost comparison
The honest comparison is not salary against contract rate — it is fully loaded cost against contract rate. A W-2 machinist in Vermont at the $49,040 median costs roughly $60,710 once you add employer payroll tax and a conservative benefits load. A contractor quoting $65,412 for the same output is close to cost-neutral, and you carry none of the unemployment insurance, benefits administration or severance exposure.
Where 1099 genuinely wins is variable demand. You pay for the engagement, not the calendar, and you can scale a territory or a project up and down without a headcount decision. Where it loses is control: the moment you need to set someone's hours, supply their tools and forbid other clients, you are describing an employee, and Vermont's agencies will say so.
Costs a 1099 engagement avoids that payroll does not:
- Employer FICA at 7.65% of wages
- Federal and state unemployment insurance
- Workers' compensation premiums in most classifications
- Health, dental and retirement contributions
- Paid leave, holidays and severance exposure
Before you sign
Labelling an engagement 1099 does not make it 1099 — the IRS weighs who controls the work, who supplies the tools and who carries the risk. For machinists the usual flashpoints are set schedules, employer-supplied equipment and exclusivity clauses. Vermont also applies its own test, which can reach a different answer than the IRS does on identical facts.
Where the machinists are in Vermont
Statewide totals hide how concentrated the work is. One metro account for the bulk of Vermont's machinist employment:
| Metro | Employed | Median annual | Population |
|---|---|---|---|
| Burlington | 100 | $50,580 | 229,000 |
What machinists earn in Vermont
Half of machinists in Vermont earn more than $49,040; half earn less. That works out to $23.58 an hour at a standard 2,080-hour year. That is 12.7% below the national median of $56,150.
The spread matters more than the midpoint for anyone working 1099. The gap between the 10th and 90th percentile is $39,650, which is the range your negotiating position, client mix and specialisation actually move you across. Top-decile earners clear $79,040, against $39,390 at the bottom decile. These are W-2 and 1099 earnings combined, before any contractor adjusts for self-employment tax and unfunded benefits — which is what the next section is for.
| Percentile | Annual | Hourly |
|---|---|---|
| 10th percentile | $39,390 | $18.94 |
| Median | $49,040 | $23.58 |
| Mean | $56,060 | $26.95 |
| 90th percentile | $79,040 | $38.00 |
How Vermont compares
Against the national median of $56,150 it sits 12.7% below. The location quotient column is the one worth reading twice: it measures how concentrated the occupation is relative to the national average, and it moves independently of pay.
| Area | Employed | Median annual | 90th percentile | Location quotient |
|---|---|---|---|---|
| Vermont | 380 | $49,040 | $79,040 | 0.65 |
| United States | 298,790 | $56,150 | $78,760 | — |
Three rates to work from
The percentile spread above is more useful as a rate card than as a statistic. Each row below takes a point in the local wage distribution and applies the same 1.33× contractor multiplier, then divides across a realistic 80% billable year. Treat the middle row as your default and the bottom row as a floor you do not go under — not as a starting offer.
| Position in the local market | Annual equivalent | Hourly at 80% utilisation |
|---|---|---|
| Entering the market (10th percentile) | $52,540 | $31.57 |
| Established (median) | $65,412 | $39.31 |
| Specialised (90th percentile) | $105,427 | $63.36 |
Finding Vermont engagements
1099WORK is a marketplace built for 1099 engagements specifically: companies post a defined scope, machinists keep one verified profile, and agreements, onboarding and payment happen in the same place. It launched as 1099REPS for independent medical sales reps and now covers the wider 1099 economy, Vermont included.
Frequently asked questions
How much does a 1099 machinist make in Vermont?
The median machinist in Vermont earns $49,040 a year according to BLS OEWS data for May 2024, covering W-2 and 1099 workers together. The top decile clears $79,040. Working 1099, you would need roughly $65,412 in gross billings to match that median after self-employment tax and unfunded benefits.
What are the risks of hiring a 1099 machinist in Vermont?
Misclassification is the main one, and it is assessed against the hiring company. If you set the schedule, supply the equipment and forbid other clients, agencies will treat the engagement as employment regardless of what the contract says, and Vermont applies its own test separately from the IRS. A written scope of work, a defined deliverable and a contractor who serves other clients are the practical defences.
How often do 1099 contractors pay taxes in Vermont?
Quarterly. The IRS expects estimated payments in mid-April, mid-June, mid-September and mid-January, and charges an underpayment penalty for missing them even if you pay in full at filing. Vermont runs its own estimated-payment schedule alongside the federal one.
How many machinists work in Vermont?
BLS counts 380 machinists in Vermont. 1099WORK estimates roughly 57 of them work on a 1099 basis, though BLS does not publish that split.
Do I need an LLC to work 1099 in Vermont?
No. A sole proprietor can accept 1099 work under their own name and Social Security number, and many contractors start that way. An LLC adds liability separation and lets you elect S-corp taxation once profit is high enough for the payroll-tax saving to beat the extra filing cost. Vermont sets its own formation fee and annual report requirements.
Is 1099 work better than a W-2 job in Vermont?
It depends entirely on rate and stability. 1099 wins on control, deductibility and upside; W-2 wins on predictability, benefits and unemployment cover. As a rule of thumb, a 1099 engagement needs to pay about 1.33× the equivalent salary before it is genuinely better money.