Hire a 1099 Plumber in Washington
What it costs to engage an independent plumber in Washington, and how to keep the engagement compliant.
- Plumbers employed
- 12,210
- Median annual pay
- $79,070
- 1099 equivalent
- $105,467
- Suggested hourly
- $63.38
- State income tax
- None
BLS OEWS, May 2024
all employment types
1.33× — estimate
at 80% utilisation
one of nine states
Engaging a 1099 plumber in Washington means competing for people inside a pool of 12,210 plumbers, pipefitters, and steamfitters, against a median wage of $79,070. This page works through what that means for an independent contractor: the pay spread, the rate you need to quote to come out ahead of payroll, and the tax and classification rules that apply in Washington.
Every figure is from the Bureau of Labor Statistics' Occupational Employment and Wage Statistics programme (May 2024) or the Census Bureau's 2024 population estimates. Where BLS suppressed a number for this market, the sentence that would have used it is simply absent — nothing here is filled in with an estimate unless it is labelled as one.
The Washington market for plumbers, pipefitters, and steamfitters
The Washington market supports 12,210 plumbers, pipefitters, and steamfitters. That figure counts every employment arrangement, W-2 and 1099 alike — BLS does not split the two. Applying 1099WORK's estimate that roughly 35% of plumbers, pipefitters, and steamfitters work on a 1099 basis puts the independent share near 4,274 people. Treat that as an order of magnitude, not a census.
Concentration is the more interesting number. The location quotient is 1.17, meaning plumbers, pipefitters, and steamfitters make up a share of local employment 17% larger than they do nationally. Demand here is structural, not incidental.
The pay premium over the national figure also gives a contractor room to price above a national rate card. Washington's lack of a state income tax is worth several points of net income at these levels, and it does not appear anywhere in the BLS figures.
What a 1099 plumber costs in Washington
The honest comparison is not salary against contract rate — it is fully loaded cost against contract rate. A W-2 plumber in Washington at the $79,070 median costs roughly $97,887 once you add employer payroll tax and a conservative benefits load. A contractor quoting $105,467 for the same output is close to cost-neutral, and you carry none of the unemployment insurance, benefits administration or severance exposure.
Where 1099 genuinely wins is variable demand. You pay for the engagement, not the calendar, and you can scale a territory or a project up and down without a headcount decision. Where it loses is control: the moment you need to set someone's hours, supply their tools and forbid other clients, you are describing an employee, and Washington's agencies will say so.
Costs a 1099 engagement avoids that payroll does not:
- Employer FICA at 7.65% of wages
- Federal and state unemployment insurance
- Workers' compensation premiums in most classifications
- Health, dental and retirement contributions
- Paid leave, holidays and severance exposure
Is this really 1099 work?
Labelling an engagement 1099 does not make it 1099 — the IRS weighs who controls the work, who supplies the tools and who carries the risk. For plumbers, pipefitters, and steamfitters the usual flashpoints are set schedules, employer-supplied equipment and exclusivity clauses. Washington also applies its own test, which can reach a different answer than the IRS does on identical facts.
Where the plumbers, pipefitters, and steamfitters are in Washington
Statewide totals hide how concentrated the work is. These 8 metros account for the bulk of Washington's plumber employment:
| Metro | Employed | Median annual | Population |
|---|---|---|---|
| Seattle | 6,540 | $87,160 | 4.1 million |
| Portland | 4,920 | $100,110 | 2.5 million |
| Spokane | 750 | $74,150 | 605,000 |
| Kennewick | 880 | $100,980 | 319,000 |
| Olympia | 290 | $78,070 | 303,000 |
| Bremerton | 990 | $75,750 | 281,000 |
| Yakima | 220 | $62,800 | 259,000 |
| Bellingham | 440 | $76,150 | 235,000 |
The money in Washington
The median plumber in Washington earns $79,070 a year. That works out to $38.02 an hour at a standard 2,080-hour year. That is 25.6% above the national median of $62,970.
The spread matters more than the midpoint for anyone working 1099. The gap between the 10th and 90th percentile is $91,710, which is the range your negotiating position, client mix and specialisation actually move you across. Top-decile earners clear $139,280, against $47,570 at the bottom decile. These are W-2 and 1099 earnings combined, before any contractor adjusts for self-employment tax and unfunded benefits — which is what the next section is for.
| Percentile | Annual | Hourly |
|---|---|---|
| 10th percentile | $47,570 | $22.87 |
| Median | $79,070 | $38.02 |
| Mean | $87,360 | $42.00 |
| 90th percentile | $139,280 | $66.96 |
Local, state and national side by side
Against the national median of $62,970 it sits 25.6% above. The location quotient column is the one worth reading twice: it measures how concentrated the occupation is relative to the national average, and it moves independently of pay.
| Area | Employed | Median annual | 90th percentile | Location quotient |
|---|---|---|---|---|
| Washington | 12,210 | $79,070 | $139,280 | 1.17 |
| United States | 455,940 | $62,970 | $105,150 | — |
A rate card for Washington
The percentile spread above is more useful as a rate card than as a statistic. Each row below takes a point in the local wage distribution and applies the same 1.33× contractor multiplier, then divides across a realistic 80% billable year. Treat the middle row as your default and the bottom row as a floor you do not go under — not as a starting offer.
| Position in the local market | Annual equivalent | Hourly at 80% utilisation |
|---|---|---|
| Entering the market (10th percentile) | $63,451 | $38.13 |
| Established (median) | $105,467 | $63.38 |
| Specialised (90th percentile) | $185,778 | $111.65 |
Getting in front of the buyers
1099WORK is a marketplace built for 1099 engagements specifically: companies post a defined scope, plumbers, pipefitters, and steamfitters keep one verified profile, and agreements, onboarding and payment happen in the same place. It launched as 1099REPS for independent medical sales reps and now covers the wider 1099 economy, Washington included.
Frequently asked questions
What hourly rate should a 1099 plumber charge in Washington?
About $63.38 an hour at 80% utilisation, derived from the $79,070 local median. That builds in the employer half of payroll tax, twenty unpaid days a year and a 15% allowance for self-funded health cover and retirement. It excludes business insurance, mileage and unbilled sales time.
How many plumbers, pipefitters, and steamfitters work in Washington?
BLS counts 12,210 plumbers, pipefitters, and steamfitters in Washington. 1099WORK estimates roughly 4,274 of them work on a 1099 basis, though BLS does not publish that split.
How much does a 1099 plumber make in Washington?
The median plumber in Washington earns $79,070 a year according to BLS OEWS data for May 2024, covering W-2 and 1099 workers together. The top decile clears $139,280. Working 1099, you would need roughly $105,467 in gross billings to match that median after self-employment tax and unfunded benefits.
What are the risks of hiring a 1099 plumber in Washington?
Misclassification is the main one, and it is assessed against the hiring company. If you set the schedule, supply the equipment and forbid other clients, agencies will treat the engagement as employment regardless of what the contract says, and Washington applies its own test separately from the IRS. A written scope of work, a defined deliverable and a contractor who serves other clients are the practical defences.
How often do 1099 contractors pay taxes in Washington?
Quarterly. The IRS expects estimated payments in mid-April, mid-June, mid-September and mid-January, and charges an underpayment penalty for missing them even if you pay in full at filing. Washington has no state income tax, so the federal schedule is the whole calendar for most contractors there.
Is 1099 work better than a W-2 job in Washington?
It depends entirely on rate and stability. 1099 wins on control, deductibility and upside; W-2 wins on predictability, benefits and unemployment cover. As a rule of thumb, a 1099 engagement needs to pay about 1.33× the equivalent salary before it is genuinely better money.